Mirror
mirror
Editing Tools
Mirror
Flip a design left-to-right or top-to-bottom.
The Mirror Image buttons flip a design: one mirrors right to left, the other top to bottom. They are useful for border corners, matched sets and for making a design cascade in the opposite direction. The Edit Feature In Depth video also covers adding a second design and stretching with the blue node.
Watch and learn · 7 videos
- Custom Quilting: Mirror, Scale & Start/Stop · 10:57
Continues a custom-quilted project by filling a wide border made of small squares. Uses Auto Scale to fit a design to the layout box, the Mirror Image buttons to flip it right-to-left, and the start/stop switch button so the machine stitches left to right, which tends to perform better.
- Set Up Custom Borders · 24:37
Sets up a decorative border on a quilt: placing the corner design and the border design as a matched set, defining the layout box with points just inside the border, and layering the border piece on top of the corners. Notes that auto-scale and auto-fill aren't available for this kind of layout, so scaling is done manually, and shows leaving a small margin of wiggle room before stitching out.
- Custom Quilting: Repeat, Mirror, Set Size & Rotate · 17:32
Custom quilting with several editing tools. Mirror flips a design left to right, Rotate turns it in 45-degree steps, and Set Size lets you type the exact width and height, such as 9 inches tall by 12 inches wide for two blocks side by side. Repeat fills the larger rectangles, after the thinner rectangles were done with edge-to-edge the week before.
- Quilt Along with Aubrey, Part 2 · 11:09
Part two of the strip quilt quilt-along. Goes through the nesting steps again: mark the nesting point by putting the needle down, roll the quilt slowly, move to the nesting point, and check where the crosshairs sit on the previous row's feather design. Then stitch out the next row, starting with a single needle stitch to pull up the bobbin thread.
- Create Your Own Design with Merge · 26:04
Explains the Merge tool in Edit, which joins two or more designs into one. Before merging, each design has its own start and stop point. After merging, the group has one start and one stop and moves, rotates, and resizes as a single unit. The example builds a custom border from four-leaf clover pieces.
- Edit Feature In Depth · 10:52
A walk-through of the Edit screen on a small quilt block. Pressing the plus sign adds a second design, and you can switch between designs by touching them or using the arrow at the top. Covers the two mirror-image buttons (left-to-right and top-to-bottom) and stretching a design with the blue node.
- Quilting Borders · 23:14
First of a three-part series on quilting borders. Sets up a multi-border quilt, adjusts grid spacing under Settings, Parameters, and places points along the long border lines. A corner-matching border design is chosen from a pattern group, filled in with mirror and rotate, and combined with Merge into one named design that can be saved.
Common questions
Where are the mirror buttons?
On the right-hand side of the display in Edit. The top one is right to left, and the bottom one is top to bottom.
Does mirroring change where the stitching starts?
It can. After mirroring in one video, the start and stop were reversed, so the start/stop switch button was used so the machine stitched left to right.


