Nesting Star String: Row Two on the Sideways Gabriella Quilt

Happy Feature Friday, quilting friends! Gabriella is back on the frame in the sewing studio this week. In Feature Friday 2026 Episode 46, Aubrey picks up right where she left off and uses the nesting feature to add a second row of Star String. She also shares a few habits that keep a big quilt square and steady from row to row.
Where We Left Off
Last week we imported and tagged the Star String design from Sew Shabby Quilting, edited it to fit with the proportion lock on, and stitched out the very first row on Gabriella, the Villa Rosa Designs postcard quilt.
A quick reminder: this quilt is loaded on its side. Aubrey turned it so she could get the most out of her 108-inch-wide backing, which means we're quilting side to side instead of top to bottom. The top of the quilt is off to one side of the frame, not up at the roller bar. Keep that in mind, because it comes up again when we check how the rows look.
Step 1: Select and Mark Your Nesting Point
Nesting starts from the Home screen, exactly where the first row finished. Highlight the Nesting feature and follow the prompts on your display.
Aubrey likes to pick a nesting point somewhere near the middle of the quilting area, so she went down the center and chose the corner of one of the stars. A crisp corner like that is easy to find again. She lowered her needle right into the fabric at that point.
If you'd rather not leave your needle in the quilt, mark the point with a chalk pencil or another marking tool instead. Just make sure it will come off your quilt top.
Tap the check mark.
Step 2: Roll the Quilt
Because the backing on this quilt is so big, Aubrey used her side clamps this time, which she doesn't do often. So before rolling, she took the side clamps off, then released the rollers.
Roll nice and easy. If your needle is down in the fabric, you don't want to put any strain on that spot.
And it's the same balancing act as always:
Leave plenty of room behind the machine so it never hits the back roller bar.
Leave enough room in front to stitch out the whole pattern.
Lock the rollers back into place and tap the check mark.
Step 3: Return to the Nesting Point
Next, the system asks you to move the machine to your nesting point. With the needle already down in the fabric, you're already there. If you used a marking tool, simply hover your needle over the mark. Tap the check mark.
Step 4: Check the Nested Row
Now the system asks you to move the machine to place the nested row, and the display shows:
Gray stars: row one, already stitched.
Black stars: row two, sitting inside the orange layout box.
The spacing the Butler worked out between the two rows looked great, so Aubrey didn't move a thing. If you do want to change the space between rows, you have two options:
Move the machine. The top option lets you shift the machine back and forth to increase or decrease the distance between rows.
Use the keypad. The second option brings up a keypad where you can type an exact spacing. Want exactly one inch between rows? Type it in.
Tap the check mark, and "Nesting complete" appears. The new row is ready to go.
Step 5: Needle Up, Then Smooth and Square
Before anything else, take your needle up out of the quilt top. That frees the machine to move around.
Then take a minute with the quilt itself. After rolling, Aubrey's batting had folded over on one side, so she smoothed it back into place. She'd also put centering tape on this quilt top. She checked each of her markers against where she set them and nudged the quilt until everything lined up again.
She admits this part is fussy. But if you want your quilt to stay as square as possible through every single row, this is one of those steps that's worth the time.
Step 6: Stitch Down the Sides
With the quilt smoothed, it's time to anchor the sides. Aubrey had already stitched most of the way down the sides during her long first draw, but she wanted to go a little further to cover the whole distance so nothing could wiggle.
A few details from her process:
She picked up right where the first line of side stitching ended: brought the bobbin thread up, recentered over the starting point, and stitched on down.
She uses regular-length stitches instead of longer basting stitches. She never picks them out anyway, and this way she doesn't forget to reset her stitch length before quilting.
She stitched down both the left and right sides, then put her side clamps back on at both ends.
Step 7: Stitch Row Two
Here's a little time-saver: Aubrey manually moved the machine over to the left side of the quilt before starting, so it didn't have as far to travel to reach the start point.
From there, it's the familiar routine:
Touch the green start button to get your prompt, then tap the check mark.
The machine moves to the start of the pattern and takes a stitch.
Pull up the bobbin thread so both tails are on top. Tap the check mark.
The machine moves back into place for the tie-off. Aubrey does three stitches, then gets started.
Two Rows of Stars
The second row of Star String came out beautifully, and the spacing between the rows is just right. Because the quilt is sideways, Aubrey checked it both ways: across her horizontals and down the vertical, since the true top of the quilt is off to the side. The rows look seamless from either direction.
The Takeaway
Nesting can feel a little tricky no matter how you do it. Aubrey's best advice is to take your time. Follow each prompt on your display one at a time and don't rush through it. That way you won't skip a step, and you won't have problems to fix later. And while you can always fix them, isn't it easier when it just goes well to begin with?
Want to see the nesting process in action? Check out the complete video here: Feature Friday 2026 Episode 46: Nesting.
Featured in this episode:
Quilt pattern: Gabriella, a postcard pattern by Villa Rosa Designs
Quilting design: Star String by Sew Shabby Quilting





Comments