top of page
cropped-QuiltEZ-Logo-2048x2048.png

Borders

borders

Layout & Stitching

Feature Library

Borders

Three ways to quilt borders, plus decorative corners.

Borders can be filled several ways on the Butler, and the series on borders walks through them: using regular layout boxes with edge-to-edge designs and Rotate, using Point to Point along the border, and combining corner and border designs into a matched set with Merge. As one video puts it, there is no single right way, so use the method you are comfortable with. The videos below also cover side borders on long quilts that can't be turned, cornerstones, and decorative corner-and-border sets.

Watch and learn · 14 videos

  • Finish Vertical Borders · 16:55

    Finishes the side borders on the same quilt. Brings back the saved design from the Saved tag, uses Rotate (45 and 45) to stand it upright, then sets Point to Point points along chalk marks. Covers the single-stitch and needle-cycle prompts at the start before stitching out the clamshells.

  • Nesting E2E in Quilt Center & Custom Quilting · 14:14

    Nests an edge-to-edge design into the center of a quilt that already has custom borders. Opens Nesting from the home screen, drops the needle into the fabric at a low point to mark the nesting point, rolls the quilt, and confirms. Continues nesting row by row down the center panel until it's filled.

  • Fill Vertical Borders · 17:10

    Fills the vertical side borders of a long quilt using Point to Point with a repeat. Sets the layout at the corners where the borders meet, uses Rotate (45 degrees twice) to stand the saved design upright, and works area by area down the sides. Useful when the quilt is longer than the frame width and can't be turned.

  • Point to Point (2026, Ep 4) · 24:31

    Uses the Point to Point feature to fill the purple borders on a quilt with a large center area. Sets the first point on a chalk line, then each next point in the chain, and starts a new pattern chain on the other side. Covers the part that trips up new users, which is deciding which direction the pattern will face, and shows how straight runs make it quick.

  • Editing Features for Custom Quilting · 14:03

    Shows several editing features for custom quilting on a smaller quilt with little extra batting. Sets a layout by marking the bottom-left and bottom-right corners, then uses horizontal and vertical Repeat to fill the space. Reminds viewers they can jump back and forth between editing features at any time.

  • Set Up Custom Borders · 24:37

    Sets up a decorative border on a quilt: placing the corner design and the border design as a matched set, defining the layout box with points just inside the border, and layering the border piece on top of the corners. Notes that auto-scale and auto-fill aren't available for this kind of layout, so scaling is done manually, and shows leaving a small margin of wiggle room before stitching out.

  • Import Patterns & Add/Edit Tags · 14:37

    Shows how to import a pattern into a chosen tag and how to change tags afterward. Pick the tag (here a quilt-specific tag) before choosing Import File from the USB stick, then in Patterns reassign a pattern's tag later to reorganize. Select Tag narrows the pattern list to one tag instead of scrolling through everything.

  • Create Your Own Design with Merge · 26:04

    Explains the Merge tool in Edit, which joins two or more designs into one. Before merging, each design has its own start and stop point. After merging, the group has one start and one stop and moves, rotates, and resizes as a single unit. The example builds a custom border from four-leaf clover pieces.

  • Point to Point Feature · 16:28

    A refresher on Point to Point (mid- and top-tier systems) using half-square triangles. Add a point with the plus sign, move to the next point, and the design faces the direction of travel. If points drift because the fabric shifts as you quilt, erase the designs with the minus button and set the points again rather than setting up the whole quilt at once.

  • Quilting Journey, Part 2 · 15:29

    Continues the whole-cloth quilt. Turns on the proportion lock before using Auto Scale so a design changes proportionally to fit the border width, adds a small margin under Settings, Parameters, and then stitches. Reminds you to engage the needle before pressing Go, otherwise the robot only traces the design.

  • Starting a New Quilt, Part 1 · 15:38

    Starts a whole-cloth quilt, using the patterns imported in the previous episode. Pulls the designs from their tag, adds a small margin in Settings so stitching does not run into neighboring lines, and uses the Modify button (the wrench) to move the layout area to the next cornerstone without re-adding the pattern. The plan is background quilting for the appliqué plus border work with cornerstones.

  • Borders, Part 3 · 9:34

    Third and final border method, using regular layout boxes with edge-to-edge designs. Creates a pattern box along the border, repeats the design, rotates it in 45-degree steps to run the right direction, and uses Auto Scale to fit it. Closes by noting there is no single right way to fill a border, so use the method you are comfortable with.

  • Borders, Part 2 · 12:39

    Second border method: filling borders with Point to Point, available on mid- and top-tier systems. Loads a heart pattern, sets points about five inches apart along the border, and builds a cornerstone layout box at the corner. Auto Scale and Morph fit the design into the space.

  • Quilting Borders · 23:14

    First of a three-part series on quilting borders. Sets up a multi-border quilt, adjusts grid spacing under Settings, Parameters, and places points along the long border lines. A corner-matching border design is chosen from a pattern group, filled in with mirror and rotate, and combined with Merge into one named design that can be saved.

Common questions

What is the easiest way to quilt a border?

Borders Part 3 uses a regular layout box along the border with an edge-to-edge design: repeat the design, rotate it in 45-degree steps so it runs the right direction, and use Auto Scale to fit it.

Can I use Point to Point on borders?

Yes, on mid- and top-tier systems. Set points along the border, for example about five inches apart, and the design is repeated evenly. It works well for narrow borders and sashing.

How do I quilt the side borders on a quilt that is longer than my frame is wide?

Fill the vertical borders in sections, rotating the design with the 45-degree buttons so it stands upright and working area by area. The Fill Vertical Borders video shows this on a quilt that can't be turned.

bottom of page