top of page
cropped-QuiltEZ-Logo-2048x2048.png

Projects & Inspiration

projects-inspiration

Quilts, bags, apparel, quilt-alongs and behind-the-scenes tours.

Feature Library

Projects & Inspiration

Quilts, bags, apparel, quilt-alongs and behind-the-scenes tours.

See what the Butler can do: whole projects from start to finish, a multi-part quilt-along, finished-project reviews, and tours of quilt shows and market setups.

Watch and learn · 21 videos

  • Quilt/Project Review · 24:05

    A review of recently finished quilts and projects, including custom-quilted pieces done point by point, a Fourth of July quilt that stacked nicely with Nesting, and a quilt with front and back both coordinated. A good look at the range of results possible with the robotic system.

  • Duffle Bag Project · 12:41

    Quilts the main body of a duffel bag project with dense bubble-style quilting for structure. Turns on the proportion lock and uses Auto Scale to fit ovals, uses a sharp needle for the thicker layers, and stitches out the first row. Suggested for tote, bag or purse projects where the quilting needs to hold shape.

  • Edge to Edge Bonus Project · 10:21

    Quilts a small bonus project from leftover fabric using an edge-to-edge design. Sets the layout about a quarter inch outside the quilt edge, uses Repeat and Auto Scale to fit the design, and adjusts stitching speed (20 is the default; around 30 is typical for an average project).

  • Flag Quilt: Nesting & Basting with Channel Locks · 14:22

    Nests the next row on a flag quilt. Opens Nesting, marks and confirms the nesting point, rolls the quilt, and reviews the display, where grayed-out pattern is what has already been stitched. Then lines up near the earlier side basting and uses Channel Locks to baste down the side before continuing to stitch.

  • Flag Quilt: USB Import, E2E Setup & Quilting · 17:30

    Sets up and quilts a flag-style quilt. Imports a pattern from a USB stick using the external storage location and assigns it to a custom tag, sets the layout points just above and left of the quilt top, scales the design, and travels across the quilt to begin. Suggested for time-crunched holiday and Quilts of Valor projects.

  • Show & Tell: Finished Projects · 16:27

    A behind-the-scenes show-and-tell of projects finished so far in 2026, including quilts using borders, Point to Point, edge-to-edge and custom work, a test quilt, and a pair of scrap-and-jelly-roll quilts. No machine walkthrough, but useful inspiration for what the robotic system can do.

  • Stitch a Design on Fabric for Clothing · 11:50

    Shows how to stitch a purchased design onto fabric for a garment. Covers stabilizing the fabric so the long arm has something to grip, importing the design by changing the tag in the Import/Export tab, using Auto Scale to fit it inside the box, and starting the stitch-out. Warns that a dense design takes a long time to stitch.

  • Houston Quilt Festival Display Tour · 7:31

    A festival visit rather than a how-to. Tours the Cherrywood Challenge display at the Houston International Quilt Festival, where quilters make 20 by 20 inch pieces around a theme. This year's theme was "Abyss," with jellyfish, seahorses, and other ocean creatures.

  • International Quilt Market Setup Tour · 6:41

    A behind-the-scenes visit rather than a how-to. Recorded on setup day at the International Quilt Market and Quilt Festival in Houston, it shows the floor plan, the booths being set up, and the team getting ready to demo their product and meet quilters.

  • Quilt Along with Aubrey, Part 3 · 16:24

    Part three of the quilt-along, finishing the jelly-roll strip quilt. Reopens the saved "strip quilt" layout, then checks the alignment by moving the crosshairs to the top-left corner of the layout box and traveling to the stop point to confirm it falls just inside the quilt edge. Shows why saving a layout is useful for big quilts that take more than one day.

  • Quilt Along with Aubrey, Part 2 · 11:09

    Part two of the strip quilt quilt-along. Goes through the nesting steps again: mark the nesting point by putting the needle down, roll the quilt slowly, move to the nesting point, and check where the crosshairs sit on the previous row's feather design. Then stitch out the next row, starting with a single needle stitch to pull up the bobbin thread.

  • Quilt Along with Aubrey, Part 1 · 17:54

    The first of a three-part quilt-along on a strip quilt. Sets the safe area, adds a layout box for the quilt top, picks a feather design from the imported tag, uses Repeat to fill the box, and saves the layout with a name so it can be reopened later. Unlike most episodes, the quilt is followed across several videos.

  • New Butler Project · 12:43

    A small project that uses a strawberry pattern. Searches for "straw" in the pattern list, then uses Repeat to add seven strawberries horizontally and more vertically, and Scale to fit them in the space without making them short and squat. Reminds you to check that the needle is not down in the fabric before pressing Start.

  • Make Pot Holders with Butler Robotics · 17:46

    A holiday project: making pot holders on the Butler. Uses the vertical and horizontal channel locks to quilt straight lines, sets a layout box for a pot-holder-size square, and uses Auto Scale to fill it. Notes you can stitch several pot holders in one go for gifts.

  • Houston Quilt Festival Tour · 5:23

    A festival visit rather than a how-to. Recorded at the Houston International Quilt Festival, it walks through a floor-to-ceiling display of red, white, and blue quilts, including flying geese designs and tiny miniature quilts with very small hexagons.

  • Finishing an Applique Project · 15:04

    Finishes an appliqué piece on a sewing machine after building a bubble background on the Butler. Uses an appliqué pressing sheet to fuse the pieces, compares a raw-edge straight stitch with a satin stitch, and stitches the bottom-most appliqué piece first, building up so there are no loose ends or overlaps.

  • Butler Projects Beyond Quilts · 12:18

    A project beyond a standard quilt: stitching on a forgotten unfinished project using a fabric with no batting. Types "bubble" in the pattern search, uses Repeat to add seven horizontal copies, then Auto Scale to fit them inside the layout box, with a reminder to turn the needle on so it stitches rather than traces.

  • Maine Quilts Tour · 3:13

    A show visit rather than a how-to. Recorded at the Maine Quilts show at the Augusta Civic Center in Augusta, Maine, it mentions the "Best of QuiltCon" display of quilts from QuiltCon 2024. Filming inside the room was not allowed for privacy, so the team shares a slideshow of photos instead.

  • Full Cloth Quilt, Part 3 · 18:26

    Finishes the whole-cloth quilt by setting up a pass-based layout. The bottom bar shows quilt length, number of passes, row spacing, and top and bottom binding. Changing the number of passes from 4.8 to a whole number of 5 recalculates the design width, and the quilt is rolled between passes, using the nesting point marked during layout.

  • Quilting Journey, Part 2 · 15:29

    Continues the whole-cloth quilt. Turns on the proportion lock before using Auto Scale so a design changes proportionally to fit the border width, adds a small margin under Settings, Parameters, and then stitches. Reminds you to engage the needle before pressing Go, otherwise the robot only traces the design.

  • Name Our Machines Contest · 4:35

    An announcement episode rather than a how-to. The team shares the shortlisted names for their three main quilting machines, explains that viewers get two votes per machine, and says winners will receive an emailed gift card.

bottom of page