Thread Break & Set Start
thread-break-set-start
Stitch Control
Thread Break & Set Start
Recover from a broken thread or empty bobbin and pick up where you left off.
When a thread breaks or the bobbin runs out mid-row, press Pause and then Thread Break. It releases the machine from the robot so you can rethread or change the bobbin and move the machine away. Then press Start and choose Set Start instead of the green check mark, move the machine to where you want to resume (overlapping the earlier stitching slightly), and confirm. You pick up where you left off without starting the design over or picking out stitches. Set Start also lets you choose where stitching begins on a design, instead of at the default start point.
Watch and learn · 6 videos
- Set Start Button · 7:22
Shows how to restart and pick up where you left off after a thread break or bobbin change. Leaves the pattern as it was, presses the green start button, chooses Set Start, moves to where the stitching stopped, and confirms. Lets you continue without starting over or picking out stitches.
- Custom Quilting: Mirror, Scale & Start/Stop · 10:57
Continues a custom-quilted project by filling a wide border made of small squares. Uses Auto Scale to fit a design to the layout box, the Mirror Image buttons to flip it right-to-left, and the start/stop switch button so the machine stitches left to right, which tends to perform better.
- Thread Break & Set Start Point · 12:43
Covers what to do when a thread breaks or the bobbin runs out mid-row. Press Pause, then Thread Break, which releases the machine so you can fix the thread problem. Then use Start and choose Set Start to move to the point where you want to resume, so you pick up where you left off instead of starting the design over.
- Set Start Feature · 5:28
Shows how to restart a row from a new point using Set Start. After rethreading, press Start, but instead of the green check mark choose Set Start, then move the machine to where you want to resume, overlapping the earlier stitching slightly. Useful when a thread breaks and you do not want to restart from the beginning of the pattern.
- Thread Break Feature · 7:15
Covers the Thread Break button on the Butler when you run out of bobbin thread or your top thread snaps mid-row. Press it, and it releases the machine from the robot so you can rethread or change the bobbin and move the machine away. Follow the on-screen prompt to move back, and it picks up where you left off.
- Editing a Design & Start/Stop · 12:26
Finishes a small quilt using several editing tools plus the Set Start feature. An edge-to-edge design is rotated to fit an on-point square, and the touchscreen handles help: blue changes size, red rotates, green moves. Set Start lets you choose where stitching begins on the design, such as beside the rabbit's neckline, instead of at the default start point.
Common questions
What do I do when my thread breaks mid-row?
Press Pause, then Thread Break. Fix the problem, then press Start and choose Set Start to move to the point where you want to resume.
Do I have to start the row over?
No. Leave the pattern where it was, use Set Start, and move to where the stitching stopped.
Can I change where a design starts?
Yes. Set Start lets you choose where stitching begins, such as beside a particular spot in the design, instead of the default start point.


