Scale
scale
Editing Tools
Scale
Resize a design to fit your block, border or quilt.
Scale is one of the most-used editing tools on the Butler. Auto Fill scales a design into the layout area in one tap. Inside the Scale tool you can use the slider bars, plus and minus buttons, the blue handles on the design, or Set Size to type an exact height and width. The proportion lock keeps height and width changing together so circles stay circular. Because Scale appears in so many projects, this page lists every video where it's used, from the full explainer to custom quilting, borders, and bag projects.
Watch and learn · 33 videos
- Duffle Bag Project · 12:41
Quilts the main body of a duffel bag project with dense bubble-style quilting for structure. Turns on the proportion lock and uses Auto Scale to fit ovals, uses a sharp needle for the thicker layers, and stitches out the first row. Suggested for tote, bag or purse projects where the quilting needs to hold shape.
- Edge to Edge Bonus Project · 10:21
Quilts a small bonus project from leftover fabric using an edge-to-edge design. Sets the layout about a quarter inch outside the quilt edge, uses Repeat and Auto Scale to fit the design, and adjusts stitching speed (20 is the default; around 30 is typical for an average project).
- Margins & Centering Without Autoscale · 10:56
Gets the same result as the Margins feature without it. Takes the half-inch margin off the design's size on each side, sets the size manually in Scale, and then uses the vertical and horizontal centering buttons in Move to center it in the layout box. Shows the math and why the margin ends up even all the way around.
- Flag Quilt: USB Import, E2E Setup & Quilting · 17:30
Sets up and quilts a flag-style quilt. Imports a pattern from a USB stick using the external storage location and assigns it to a custom tag, sets the layout points just above and left of the quilt top, scales the design, and travels across the quilt to begin. Suggested for time-crunched holiday and Quilts of Valor projects.
- Custom Quilting Background Triangles · 22:00
Fills background triangles on a custom quilt. Sets a scale size by entering a width and height, uses the 45-degree Rotate to orient each triangle, and then selects the sized design from the tag to speed up the repeated blocks. Encourages trying custom quilting for results beyond edge-to-edge, even though setup takes time.
- Set Up E2E & Import a Pattern · 20:28
Sets up an edge-to-edge quilt from start to finish. Sets the layout points for the quilting space, then imports a purchased design in the Import/Export tab and assigns it to a custom tag instead of the default Imported tag. Shows how to find it afterward in the Patterns tab (listed numerically, then alphabetically) and add it to the layout.
- New Layout, Scale, Proportion Lock & Save Layout · 15:16
Sets up a new layout on a fresh quilt, then uses Auto Scale and the Proportion Lock (the lock icon closes and turns orange so height and width change together). Finishes by saving the whole layout with the Save Layout button and checking the Saved Layout file list to confirm it's there, so work can be paused and resumed later.
- Set Up E2E Using Edit Features · 21:13
Sets up an edge-to-edge layout from scratch using only editing features. Uses Repeat to make rows of a rose design, Scale to fit them in the layout area, Move to offset the rows, Crop to trim the edges, and Merge to combine the pieces. Checks in Settings that jump stitches are turned on because cropping cuts off parts of the design.
- Scale, Crop & Save · 14:12
Crops a design to a section of the quilt, stitches out a small apple, then saves the edited version. In Edit, uses Save to name the design and put it in the Saved tag, so it can be pulled up later from the Patterns filter at the correct size for the rest of the quilt.
- Editing Features for Custom Quilting · 14:03
Shows several editing features for custom quilting on a smaller quilt with little extra batting. Sets a layout by marking the bottom-left and bottom-right corners, then uses horizontal and vertical Repeat to fill the space. Reminds viewers they can jump back and forth between editing features at any time.
- E2E & Nesting · 17:59
A refresher on nesting for an edge-to-edge quilt. After finishing the first row, opens Nesting from the home screen, marks a nesting point on the quilt top, rolls the quilt, and re-hovers over the point. Explains what to do if the point was marked with a pen and when to stitch down the sides.
- Custom Quilt Triangles Two Ways · 18:02
Shows two ways to fill triangles in a custom-quilted project. One uses Auto Scale to fit a leafy design into each triangle. The other uses Point to Point designs, so the machine stitches one triangle and runs directly into the next as a chain. Compares the look of custom quilting with an edge-to-edge design.
- Custom Quilting: Mirror, Scale & Start/Stop · 10:57
Continues a custom-quilted project by filling a wide border made of small squares. Uses Auto Scale to fit a design to the layout box, the Mirror Image buttons to flip it right-to-left, and the start/stop switch button so the machine stitches left to right, which tends to perform better.
- Custom Quilting: Repeat, Mirror, Set Size & Rotate · 17:32
Custom quilting with several editing tools. Mirror flips a design left to right, Rotate turns it in 45-degree steps, and Set Size lets you type the exact width and height, such as 9 inches tall by 12 inches wide for two blocks side by side. Repeat fills the larger rectangles, after the thinner rectangles were done with edge-to-edge the week before.
- Crop Feature & Set Jump Stitches · 22:16
Uses Crop and jump stitches together on a quilt with edge-to-edge and custom block quilting. Crop's first button removes everything outside the layout box. Because the cropped design leaves gaps, jump stitches are set in Settings under Parameters (here 8 inches), and you follow the on-screen prompts. The 8 inches turned out to be more than needed since the jumps were short.
- Planning & Custom Quilting · 14:45
Plans and stitches custom quilting on a large quilt. Sets rectangles by touching the plus sign at each corner, uses Auto Scale to shrink a design into each rectangle, and works through the quilt in stages, such as the black-thread sections first. Advises taking your time with custom work because rushing is when mistakes happen.
- Choose Patterns & Use Editing Features · 15:18
Shows how to choose a pattern and use the editing tools on a new quilt. Searches for "bubble" in the pattern list, then uses Repeat horizontally and vertically to fill the space with lots of tiny bubbles, and turns on the proportion lock so Auto Scale keeps the circles round. Also explains how the presenter picks patterns for a quilt.
- Set Up a Quilt & Adjust a Pattern · 11:22
Sets up a pattern on a jelly-roll quilt after the top was basted down the week before. Works in a layout box, uses Repeat horizontally to fill the width, and Scale with the slider bars, plus and minus buttons, or blue nodes to fit it. Highlights the spacing option in the Repeat tool for adjusting the gap between rows.
- Larger Quilt: Point of Origin & Save Layout · 15:29
Sets up a large edge-to-edge quilt that will take more than one day. Before saving the layout, walks the machine to the back-left corner of the frame to set a point of origin, so you can pick the quilt up another day without guessing. Sets the layout box as the quilt top, saves the layout with a name, and shows the file folder icon where saved layouts are kept.
- Custom Quilting a Star Quilt · 10:50
Fills in the triangles of the star quilt one piece at a time. Chooses a pattern from the quilt's tag, uses Auto Scale (or manual scale if you lack it) to fit it into each triangle, and adds a small margin in Settings so there is a little space around the design. Notes a margin is a preference, and some quilts may not want one.
- Make a Design More Dense · 14:22
Shows how to make a design denser. Add more repeats, then turn on the proportion lock and use Auto Scale so the design shrinks proportionally into the layout box. In the example, five repeats pulled the quilting area in by almost five inches, giving denser quilting while the design keeps its circles.
- Quilt Along with Aubrey, Part 1 · 17:54
The first of a three-part quilt-along on a strip quilt. Sets the safe area, adds a layout box for the quilt top, picks a feather design from the imported tag, uses Repeat to fill the box, and saves the layout with a name so it can be reopened later. Unlike most episodes, the quilt is followed across several videos.
- Custom Quilting with Modify · 17:11
Shows how to use the Modify button on a Valentine's Day quilt where each block is custom-filled. After setting up one block, go to Layout, press the wrench, and reset the four corner points on the next block, then use Auto Scale so the design fits. Saves time on blocks and strips that take the same design.
- New Butler Project · 12:43
A small project that uses a strawberry pattern. Searches for "straw" in the pattern list, then uses Repeat to add seven strawberries horizontally and more vertically, and Scale to fit them in the space without making them short and squat. Reminds you to check that the needle is not down in the fabric before pressing Start.
- Nest a Geometric Pattern · 12:56
Shows how to nest a geometric pattern, in response to a viewer's question, since most demos use curvy designs. Loads the pattern into the layout box, stitches the first row, then uses Nesting from the Home screen to line up the second row. Advises watching the angles of the design and the distance between rows.
- Offset an E2E Design While Nesting · 17:57
Shows how to offset an edge-to-edge design while nesting, a technique a customer asked about. Because the machine lacks throat space to stitch two offset rows at once, you stitch one row at a time and use the Edit screen's Repeat and Move tools to offset the design before nesting the next row into the gaps. Includes marking the nesting point and leaving enough room to roll the quilt.
- Save, Close & Reopen a Layout · 15:28
Shows how to save a quilt layout and reopen it later. After setting the safe area and the quilt-top layout box, save the whole layout from the disc-and-pencil icon, name it, and confirm that it says layout saved. A saved layout lets you turn the machine off and come back to the same spot, which is helpful if you are interrupted.
- Scale Feature · 14:14
Covers the Scale tool for resizing a design to fit a layout box. With the proportion lock on, Auto Scale fits the design in while keeping its original proportions; with it off, the design is stretched to fill the space. On mid- and top-tier models, Morph reshapes the design to fit the block exactly.
- Quilting Journey, Part 2 · 15:29
Continues the whole-cloth quilt. Turns on the proportion lock before using Auto Scale so a design changes proportionally to fit the border width, adds a small margin under Settings, Parameters, and then stitches. Reminds you to engage the needle before pressing Go, otherwise the robot only traces the design.
- Starting a New Quilt, Part 1 · 15:38
Starts a whole-cloth quilt, using the patterns imported in the previous episode. Pulls the designs from their tag, adds a small margin in Settings so stitching does not run into neighboring lines, and uses the Modify button (the wrench) to move the layout area to the next cornerstone without re-adding the pattern. The plan is background quilting for the appliqué plus border work with cornerstones.
- Edge to Edge · 11:06
A simple edge-to-edge setup on a small gift quilt about 42 by 45 inches. Sets the layout box roughly a quarter inch outside the quilt top, picks a swirl-and-pearl edge-to-edge design, and uses the Repeat tool's horizontal repeat to fill the box. Stresses there is no right or wrong way to place an edge-to-edge design: use the safe area, a layout box, or autofill.
- Modify Feature (2024, Ep 11) · 9:53
Shows the Modify button (the wrench) in Layout. It resets the pattern layout area to a new spot on the quilt while keeping the design's current size and orientation, so you do not have to re-add, rotate, and scale the pattern for every triangle. Triangles pointing the opposite way still need a new layout box.
- Scaling Feature · 9:08
Covers every way to resize a design on the Butler. Auto Fill scales a design into the layout area in one tap. In the Scale tool you can use the slider bars, the plus and minus buttons, the blue handles on the design, or Set Size to type an exact height and width. Mid- and top-tier systems also have Auto Scale, a proportion lock, and Morph for fitting a design into an uneven block.
Common questions
What are the ways to resize a design?
Auto Fill, the slider bars, the plus and minus buttons, the blue handles on the touchscreen, and Set Size for exact measurements. The Scaling Feature video covers each.
What does the proportion lock do?
When it's on, the lock icon closes and turns orange, and height and width change together so the design keeps its shape. With it off, the design is stretched to fill the space.
What is Morph?
Morph reshapes a design to fit a block exactly, which helps when a block has shifted or skewed from piecing and quilting. It only works on four-sided shapes.


