Repeat
repeat
Editing Tools
Repeat
Fill a layout box with copies of a design.
Repeat fills a layout box with copies of a design. Tap the white number bar to type an exact count, or use the plus and minus buttons and watch the design change on screen. Horizontal and vertical repeats are set separately, and the spacing option adjusts the gap between rows. Repeats can leave gaps depending on where each copy starts and stops. It pairs naturally with Scale and Auto Scale: more repeats mean a denser design.
Watch and learn · 16 videos
- Repeat, Crop & Jump Stitches · 16:52
Shows Repeat, Crop and jump stitches working together. Crops everything outside the layout box for a clean edge instead of over-stitching onto batting and backing, then explains the trade-off that it adds jump stitches and takes a little longer. Shows setting the jump-stitch distance in Settings > Parameters (8 inches here) so the machine ties off before the thread is under too much tension.
- Set Up E2E & Import a Pattern · 20:28
Sets up an edge-to-edge quilt from start to finish. Sets the layout points for the quilting space, then imports a purchased design in the Import/Export tab and assigns it to a custom tag instead of the default Imported tag. Shows how to find it afterward in the Patterns tab (listed numerically, then alphabetically) and add it to the layout.
- Set Up E2E Using Edit Features · 21:13
Sets up an edge-to-edge layout from scratch using only editing features. Uses Repeat to make rows of a rose design, Scale to fit them in the layout area, Move to offset the rows, Crop to trim the edges, and Merge to combine the pieces. Checks in Settings that jump stitches are turned on because cropping cuts off parts of the design.
- Fill Vertical Borders · 17:10
Fills the vertical side borders of a long quilt using Point to Point with a repeat. Sets the layout at the corners where the borders meet, uses Rotate (45 degrees twice) to stand the saved design upright, and works area by area down the sides. Useful when the quilt is longer than the frame width and can't be turned.
- Editing Features for Custom Quilting · 14:03
Shows several editing features for custom quilting on a smaller quilt with little extra batting. Sets a layout by marking the bottom-left and bottom-right corners, then uses horizontal and vertical Repeat to fill the space. Reminds viewers they can jump back and forth between editing features at any time.
- Custom Quilting: Repeat, Mirror, Set Size & Rotate · 17:32
Custom quilting with several editing tools. Mirror flips a design left to right, Rotate turns it in 45-degree steps, and Set Size lets you type the exact width and height, such as 9 inches tall by 12 inches wide for two blocks side by side. Repeat fills the larger rectangles, after the thinner rectangles were done with edge-to-edge the week before.
- Choose Patterns & Use Editing Features · 15:18
Shows how to choose a pattern and use the editing tools on a new quilt. Searches for "bubble" in the pattern list, then uses Repeat horizontally and vertically to fill the space with lots of tiny bubbles, and turns on the proportion lock so Auto Scale keeps the circles round. Also explains how the presenter picks patterns for a quilt.
- Set Up a Quilt & Adjust a Pattern · 11:22
Sets up a pattern on a jelly-roll quilt after the top was basted down the week before. Works in a layout box, uses Repeat horizontally to fill the width, and Scale with the slider bars, plus and minus buttons, or blue nodes to fit it. Highlights the spacing option in the Repeat tool for adjusting the gap between rows.
- Make a Design More Dense · 14:22
Shows how to make a design denser. Add more repeats, then turn on the proportion lock and use Auto Scale so the design shrinks proportionally into the layout box. In the example, five repeats pulled the quilting area in by almost five inches, giving denser quilting while the design keeps its circles.
- New Butler Project · 12:43
A small project that uses a strawberry pattern. Searches for "straw" in the pattern list, then uses Repeat to add seven strawberries horizontally and more vertically, and Scale to fit them in the space without making them short and squat. Reminds you to check that the needle is not down in the fabric before pressing Start.
- Nest a Geometric Pattern · 12:56
Shows how to nest a geometric pattern, in response to a viewer's question, since most demos use curvy designs. Loads the pattern into the layout box, stitches the first row, then uses Nesting from the Home screen to line up the second row. Advises watching the angles of the design and the distance between rows.
- Create Your Own Design with Merge · 26:04
Explains the Merge tool in Edit, which joins two or more designs into one. Before merging, each design has its own start and stop point. After merging, the group has one start and one stop and moves, rotates, and resizes as a single unit. The example builds a custom border from four-leaf clover pieces.
- Offset an E2E Design While Nesting · 17:57
Shows how to offset an edge-to-edge design while nesting, a technique a customer asked about. Because the machine lacks throat space to stitch two offset rows at once, you stitch one row at a time and use the Edit screen's Repeat and Move tools to offset the design before nesting the next row into the gaps. Includes marking the nesting point and leaving enough room to roll the quilt.
- Butler Projects Beyond Quilts · 12:18
A project beyond a standard quilt: stitching on a forgotten unfinished project using a fabric with no batting. Types "bubble" in the pattern search, uses Repeat to add seven horizontal copies, then Auto Scale to fit them inside the layout box, with a reminder to turn the needle on so it stitches rather than traces.
- Repeat Feature · 16:05
Explains the Repeat tool for filling a layout box with copies of a design. Tap the white number bar to type an exact count, or use the plus and minus buttons to watch the design change on screen. Horizontal and vertical repeats can be set separately. Notes that repeats can leave gaps between copies, depending on where each repeat starts and stops.
- Edge to Edge · 11:06
A simple edge-to-edge setup on a small gift quilt about 42 by 45 inches. Sets the layout box roughly a quarter inch outside the quilt top, picks a swirl-and-pearl edge-to-edge design, and uses the Repeat tool's horizontal repeat to fill the box. Stresses there is no right or wrong way to place an edge-to-edge design: use the safe area, a layout box, or autofill.
Common questions
How do I add more copies of a design?
Open Repeat in Edit, then type a number in the white bar or use plus and minus. Set horizontal and vertical repeats separately.
How do I make a design denser?
Add more repeats, then turn on the proportion lock and use Auto Scale so the design shrinks proportionally into the layout box.
Why are there gaps between repeats?
Repeats can leave gaps depending on where each copy starts and stops, and the spacing option in the Repeat tool lets you adjust them.


