top of page
cropped-QuiltEZ-Logo-2048x2048.png

Quilt Layout Guide

quilt-layout-guide

Layout & Stitching

Feature Library

Quilt Layout Guide

Preview how an edge-to-edge design lands on your whole quilt.

The Quilt Layout Guide (called the Quilt Layout Helper in an earlier video) lays out an edge-to-edge design based on the quilt length you enter. You find it in Edit as a green box with arrows. It shows how the design will repeat down the quilt, so you can see how much of the last repeat will be quilted at the bottom and adjust the bindings and passes before you start. The videos below walk through setup on small and large quilts.

Watch and learn · 5 videos

  • Quilt Layout Guide (2025, Ep 46) · 18:16

    Walks through setting up the Quilt Layout Guide on a new quilt. Sets the safe area on the backing, adds the layout for the quilt top, imports a pattern by tag, then opens the Quilt Layout Guide in Edit to enter the quilt length (48 inches instead of the default 72) and choose the pattern. Notes that it's a time saver when a quilt needs to be finished quickly.

  • Import a Pattern & Use Quilt Layout Guide · 15:38

    Sets up a large quilt top using an imported pattern and the Quilt Layout Guide. Sets the whole frame as the safe area and a large layout box for the quilt top (about 66 inches), imports the pattern from Import/Export into a custom tag instead of "imported", and then goes from Layout straight into Edit to use the layout guide rather than adding the pattern first.

  • Quilt Layout Guide (2025, Ep 16) · 19:58

    Walks through the Quilt Layout Guide on mid- and top-tier systems with a large quilt. Set a layout box for the quilt top first, since it defines the width of the layout. In the guide, Autofill fills the design across the quilt, and you change the quilt length from the 72-inch default to your real length. Adjusting the bindings and watching how the passes fit helps you decide how the last row should land.

  • Quilt Layout Helper · 20:18

    Introduces the Quilt Layout Helper on mid- and top-tier Butler systems. Found in Edit as a green box with arrows, it lays out an edge-to-edge design based on the quilt length you enter (the default is 72 inches; the example uses 45.5 inches for a baby quilt). It shows how the design will repeat down the quilt so you can see how much of the last repeat will be quilted at the bottom.

  • Full Cloth Quilt, Part 3 · 18:26

    Finishes the whole-cloth quilt by setting up a pass-based layout. The bottom bar shows quilt length, number of passes, row spacing, and top and bottom binding. Changing the number of passes from 4.8 to a whole number of 5 recalculates the design width, and the quilt is rolled between passes, using the nesting point marked during layout.

Common questions

Where do I find the Quilt Layout Guide?

In Edit, on the right side of the display: a light green box with two small black arrows. Set a layout box for the quilt top first, since it defines the width.

What quilt length does it use?

The default is 72 inches, so enter the real length of your quilt (for example 48 for a small quilt).

Why use it?

It shows how the design repeats down the quilt, so you can decide how the last row should land. It's also a time saver when a quilt needs to be finished quickly.

bottom of page