top of page
cropped-QuiltEZ-Logo-2048x2048.png

Jump Stitches

jump-stitches

Stitch Control

Feature Library

Jump Stitches

Control how far the machine jumps before it ties off.

Whenever a design is cropped or has breaks in it, the machine ties off and jumps to the next spot. The jump-stitch distance is set in Settings under the Parameters tab: enter a number and the machine will jump at most that far before asking you to cut the threads. The videos use six to eight inches, and show the prompts you follow at each jump: turn the stitching off, cycle the needle to lock stitches, and bring up the bobbin thread.

Watch and learn · 10 videos

  • Repeat, Crop & Jump Stitches · 16:52

    Shows Repeat, Crop and jump stitches working together. Crops everything outside the layout box for a clean edge instead of over-stitching onto batting and backing, then explains the trade-off that it adds jump stitches and takes a little longer. Shows setting the jump-stitch distance in Settings > Parameters (8 inches here) so the machine ties off before the thread is under too much tension.

  • Set Up E2E Using Edit Features · 21:13

    Sets up an edge-to-edge layout from scratch using only editing features. Uses Repeat to make rows of a rose design, Scale to fit them in the layout area, Move to offset the rows, Crop to trim the edges, and Merge to combine the pieces. Checks in Settings that jump stitches are turned on because cropping cuts off parts of the design.

  • Point to Point (2026, Ep 4) · 24:31

    Uses the Point to Point feature to fill the purple borders on a quilt with a large center area. Sets the first point on a chalk line, then each next point in the chain, and starts a new pattern chain on the other side. Covers the part that trips up new users, which is deciding which direction the pattern will face, and shows how straight runs make it quick.

  • Crop & Adjust Jump Stitches · 11:48

    Uses Crop on a large design repeated across the pattern box. Applies Repeat and Auto Scale, then crops what falls outside the box. Because cropping creates jump stitches, shows how to confirm they're turned on in Settings > Parameters and adjust the distance (set to eight here), then walks through the prompts to turn stitching off and cycle the needle.

  • Crop, Record, Move & Jump Stitches · 18:30

    Covers quilting a large panel by combining Crop, Move and jump-stitch settings. Crops everything outside the box, sets a maximum jump-stitch length (about six to eight inches here), and walks through the prompts to turn stitching off and on at each jump. Explains why the extra steps are tedious but necessary to get a clean crop.

  • Crop Feature & Set Jump Stitches · 22:16

    Uses Crop and jump stitches together on a quilt with edge-to-edge and custom block quilting. Crop's first button removes everything outside the layout box. Because the cropped design leaves gaps, jump stitches are set in Settings under Parameters (here 8 inches), and you follow the on-screen prompts. The 8 inches turned out to be more than needed since the jumps were short.

  • Crop Bottom Row to Finish Quilt · 17:42

    Uses Crop (mid- and top-tier systems) to finish the bottom row of a quilt so it does not stitch onto the batting and backing, since only about six inches of the design is needed. After nesting, creates another layout box for the area to crop, selects the box to cut from, and applies Crop. After cropping, jump stitches need to be handled during stitching.

  • Crop the Last Row of a Quilt · 10:00

    Shows Crop on the last row of a quilt when there is little backing left. The row is already nested, and Crop removes everything that falls outside the layout box, so all stitching stays on the quilt top. The finished row stitched about three-quarters of an inch into the backing and batting.

  • Text Feature (2024, Ep 27) · 11:49

    Shows the Text feature, available on mid- and top-tier Butler systems, for quilting words and numbers. Text is added from the Edit screen (the small tilted T at the bottom of the inside ribbon), then typed on a large on-screen keyboard. The example stitches the word "Valentine" in a layout box, with a reminder to engage the needle so it stitches instead of traces.

  • Free Motion with Record, Applique & Crop · 14:28

    Finishes a quilt using a few features together: recording free-motion work, an appliqué piece, and Crop. A layout box is set around a fox appliqué, the heart design is scaled to the box, and Crop removes the hearts and pearls that fall outside the box or on top of the fox so the stitching goes around it.

Common questions

Where do I set jump stitches?

In Settings, in the Parameters tab, under jump stitch. Tap the box and type a distance on the keypad.

What number should I use?

The videos use about six to eight inches, which is a distance the presenter is comfortable with before the thread is under too much tension. Eight turned out to be more than needed on one quilt where the jumps were short.

Why do I need them?

They're needed whenever you crop, since cropping cuts the design and the machine has to jump from one edge to the next.

bottom of page