Crop
crop
Editing Tools
Crop
Trim stitching that falls outside a box or around an applique.
Crop removes parts of a design that fall outside your layout box, or inside or outside an applique. It lets you finish the last row of a quilt without stitching onto the batting and backing, or quilt around a monogram. After cropping, jump stitches need to be handled while stitching, which takes a little longer but gives a clean edge. The videos cover the first crop button (removing everything outside the box), the applique buttons, the back arrow and undo button, and the prompts that follow.
Watch and learn · 16 videos
- E2E Setup with Edit Features & USB Pattern Load · 17:13
Loads a purchased pattern from a USB stick, assigns it to a custom tag, and finds it in the Patterns tab. Then uses Repeat to fill the layout, turns on the proportion lock so circles stay circular, uses Auto Scale, and moves the design into place before stitching out an edge-to-edge layout.
- Repeat, Crop & Jump Stitches · 16:52
Shows Repeat, Crop and jump stitches working together. Crops everything outside the layout box for a clean edge instead of over-stitching onto batting and backing, then explains the trade-off that it adds jump stitches and takes a little longer. Shows setting the jump-stitch distance in Settings > Parameters (8 inches here) so the machine ties off before the thread is under too much tension.
- Crop Feature — Tote Bag · 16:18
Quilts around a monogram on a tote bag project using Crop. Toggles between layout boxes, then uses the crop buttons for inside or outside an applique. Explains how to use the back arrow if the crop comes out strange, and the undo button to fill areas back in, before moving into Nesting. Crop is available on mid- and top-tier models.
- Nesting & Channel Locks · 14:17
Nests a second row on a quilt where the top rows were merged and cropped, and notes that cropping carries along into nesting. Marks a nesting point at a low point in the design, then uses horizontal Channel Locks to tack down the side of the quilt so it doesn't creep before stitching out.
- Set Up E2E Using Edit Features · 21:13
Sets up an edge-to-edge layout from scratch using only editing features. Uses Repeat to make rows of a rose design, Scale to fit them in the layout area, Move to offset the rows, Crop to trim the edges, and Merge to combine the pieces. Checks in Settings that jump stitches are turned on because cropping cuts off parts of the design.
- Scale, Crop & Save · 14:12
Crops a design to a section of the quilt, stitches out a small apple, then saves the edited version. In Edit, uses Save to name the design and put it in the Saved tag, so it can be pulled up later from the Patterns filter at the correct size for the rest of the quilt.
- Crop & Adjust Jump Stitches · 11:48
Uses Crop on a large design repeated across the pattern box. Applies Repeat and Auto Scale, then crops what falls outside the box. Because cropping creates jump stitches, shows how to confirm they're turned on in Settings > Parameters and adjust the distance (set to eight here), then walks through the prompts to turn stitching off and cycle the needle.
- Quilt Layout Guide (2025, Ep 46) · 18:16
Walks through setting up the Quilt Layout Guide on a new quilt. Sets the safe area on the backing, adds the layout for the quilt top, imports a pattern by tag, then opens the Quilt Layout Guide in Edit to enter the quilt length (48 inches instead of the default 72) and choose the pattern. Notes that it's a time saver when a quilt needs to be finished quickly.
- New Quilt & E2E Design · 14:53
Sets up a new quilt for an edge-to-edge design. Marks the quilting area, accounts for the quilt shrinking the available space as it rolls onto the back roller bar, nudges the design to fill an empty corner, and stitches out. Also mentions where to find the patterns used in the video.
- Custom Quilt Details · 16:06
Wraps up a custom-quilting project with finishing details on the panel. Traces around shapes by recording points in Record, converts the outline with Applique, repeats a design, scales it, and uses Crop to remove anything outside the layout area. Notes that cropping near dense areas leaves extra threads to clip.
- Crop, Record, Move & Jump Stitches · 18:30
Covers quilting a large panel by combining Crop, Move and jump-stitch settings. Crops everything outside the box, sets a maximum jump-stitch length (about six to eight inches here), and walks through the prompts to turn stitching off and on at each jump. Explains why the extra steps are tedious but necessary to get a clean crop.
- Crop Feature & Set Jump Stitches · 22:16
Uses Crop and jump stitches together on a quilt with edge-to-edge and custom block quilting. Crop's first button removes everything outside the layout box. Because the cropped design leaves gaps, jump stitches are set in Settings under Parameters (here 8 inches), and you follow the on-screen prompts. The 8 inches turned out to be more than needed since the jumps were short.
- Crop Bottom Row to Finish Quilt · 17:42
Uses Crop (mid- and top-tier systems) to finish the bottom row of a quilt so it does not stitch onto the batting and backing, since only about six inches of the design is needed. After nesting, creates another layout box for the area to crop, selects the box to cut from, and applies Crop. After cropping, jump stitches need to be handled during stitching.
- Starting a New Quilt · 14:28
Starts a new quilt with a purchased design. Moves the design vertically in small steps to position a big swirl, then deals with stitching that runs past the quilt top by either using Crop or sewing scrap fabric on as an extra leader so the design can quilt onto it. The leader fabric can be removed later with a seam ripper.
- Crop the Last Row of a Quilt · 10:00
Shows Crop on the last row of a quilt when there is little backing left. The row is already nested, and Crop removes everything that falls outside the layout box, so all stitching stays on the quilt top. The finished row stitched about three-quarters of an inch into the backing and batting.
- Free Motion with Record, Applique & Crop · 14:28
Finishes a quilt using a few features together: recording free-motion work, an appliqué piece, and Crop. A layout box is set around a fox appliqué, the heart design is scaled to the box, and Crop removes the hearts and pearls that fall outside the box or on top of the fox so the stitching goes around it.
Common questions
What does Crop do?
It removes stitching outside your layout box, or inside or outside an applique, so the design doesn't stitch onto the batting and backing.
Why do I get jump stitches after cropping?
Cropped designs have gaps, so the machine ties off and jumps. Set the jump-stitch distance in Settings under the Parameters tab.
What if my crop looks wrong?
Use the back arrow to put the crop back as it was and try the other button, or use undo to fill an area back in.


