top of page

Custom Quilting

custom-quilting

Block-by-block and area-by-area quilting with the Butler.

Feature Library

Custom Quilting

Block-by-block and area-by-area quilting with the Butler.

Custom quilting takes more setup than an edge-to-edge design but gives a very different look. These videos fill triangles, borders, blocks and odd shapes using the editing tools, Point to Point, Modify and Morph.

Check the fit before stitching

On the Butler display, a leaf-and-swirl design fits inside the three sides of a marked triangle.

After marking the three corners in Layout, check that the leaves and swirl stay inside the triangle before you stitch.

Watch Custom Quilting Triangles


Watch and learn · 19 videos

  • Custom Quilting, Pattern Tags & Margins · 17:43

    Prepares for custom block quilting by organizing pattern tags. Uses Edit Tags (a mouse helps) to create a new tag, selects multiple patterns at once with multi-select to add them to it, and then sets a margin so Auto Scale fits the design inside each block with a gap around the edges.

  • Custom Quilting Background Triangles · 22:00

    Fills background triangles on a custom quilt. Sets a scale size by entering a width and height, uses the 45-degree Rotate to orient each triangle, and then selects the sized design from the tag to speed up the repeated blocks. Encourages trying custom quilting for results beyond edge-to-edge, even though setup takes time.

  • Custom Quilting Five-Point Shapes · 13:35

    Custom-quilts a five-sided shape. Shows that any number of points can be set in Layout (two for a rectangle, three for a triangle, five for a pentagon) and the shape follows them, as long as points are set in one direction. Uses a Point to Point design as a block fill instead, and notes that fabric shifts as quilting progresses, so each space may need a small adjustment.

  • Custom Quilting Triangles · 14:18

    Fills triangles in a custom-quilted block. Sets the three corner points of the triangle in Layout, tries Auto Scale, and explains that Morph only works on four-sided shapes, so triangles are adjusted with the Modify button in Layout instead. Shows fine-tuning the fit before stitching out.

  • Custom Quilting & Import an Entire Pattern Folder · 15:14

    Imports an entire folder of patterns at once from a USB stick. Uses the Import/Export tab and the external storage option, which tags the 81 imported patterns using the folder's name instead of the default Imported tag. Then picks a pattern from the new tag, loads it into the pattern box, and starts a custom-quilted project.

  • Nesting E2E in Quilt Center & Custom Quilting · 14:14

    Nests an edge-to-edge design into the center of a quilt that already has custom borders. Opens Nesting from the home screen, drops the needle into the fabric at a low point to mark the nesting point, rolls the quilt, and confirms. Continues nesting row by row down the center panel until it's filled.

  • Editing Features for Custom Quilting · 14:03

    Shows several editing features for custom quilting on a smaller quilt with little extra batting. Sets a layout by marking the bottom-left and bottom-right corners, then uses horizontal and vertical Repeat to fill the space. Reminds viewers they can jump back and forth between editing features at any time.

  • Custom Quilt Triangles Two Ways · 18:02

    Shows two ways to fill triangles in a custom-quilted project. One uses Auto Scale to fit a leafy design into each triangle. The other uses Point to Point designs, so the machine stitches one triangle and runs directly into the next as a chain. Compares the look of custom quilting with an edge-to-edge design.

  • Custom Quilt Details · 16:06

    Wraps up a custom-quilting project with finishing details on the panel. Traces around shapes by recording points in Record, converts the outline with Applique, repeats a design, scales it, and uses Crop to remove anything outside the layout area. Notes that cropping near dense areas leaves extra threads to clip.

  • Custom Quilting: Mirror, Scale & Start/Stop · 10:57

    Continues a custom-quilted project by filling a wide border made of small squares. Uses Auto Scale to fit a design to the layout box, the Mirror Image buttons to flip it right-to-left, and the start/stop switch button so the machine stitches left to right, which tends to perform better.

  • Custom Quilting: Repeat, Mirror, Set Size & Rotate · 17:32

    Custom quilting with several editing tools. Mirror flips a design left to right, Rotate turns it in 45-degree steps, and Set Size lets you type the exact width and height, such as 9 inches tall by 12 inches wide for two blocks side by side. Repeat fills the larger rectangles, after the thinner rectangles were done with edge-to-edge the week before.

  • Custom Quilting with Morph & Modify · 14:45

    Continues custom quilting on a Space Invaders quilt using Modify and Morph. Modify moves the layout area of a design that was just stitched to a new block, and when a block has shifted or skewed from piecing and quilting, Scale's Morph button reshapes the design to fit. Leaves the colored piecing blocks empty so quilting is not too dense.

  • Planning & Custom Quilting · 14:45

    Plans and stitches custom quilting on a large quilt. Sets rectangles by touching the plus sign at each corner, uses Auto Scale to shrink a design into each rectangle, and works through the quilt in stages, such as the black-thread sections first. Advises taking your time with custom work because rushing is when mistakes happen.

  • Disengage Belts for Free Motion Quilting · 8:54

    Answers a viewer's question about releasing the belts so you can do free-motion quilting more easily. You can free-motion with the belts on, but the machine feels stiffer and smooth curves are harder. Releasing the belts takes only a push of a finger, and you must put them back around the pulleys with the brackets in place before going back to automated quilting, or nothing will move.

  • Custom Quilting a Star Quilt · 10:50

    Fills in the triangles of the star quilt one piece at a time. Chooses a pattern from the quilt's tag, uses Auto Scale (or manual scale if you lack it) to fit it into each triangle, and adds a small margin in Settings so there is a little space around the design. Notes a margin is a preference, and some quilts may not want one.

  • Custom Quilting a New Quilt · 13:38

    Starts custom quilting a small red, white, and blue star quilt using designs imported in the last episode. Picks patterns from the quilt's tag, sets a 4-inch height, and uses Point to Point, marking points about halfway across a border and moving across the quilt top and setting points along the seam line.

  • Custom Quilting with Modify · 17:11

    Shows how to use the Modify button on a Valentine's Day quilt where each block is custom-filled. After setting up one block, go to Layout, press the wrench, and reset the four corner points on the next block, then use Auto Scale so the design fits. Saves time on blocks and strips that take the same design.

  • Finishing an Applique Project · 15:04

    Finishes an appliqué piece on a sewing machine after building a bubble background on the Butler. Uses an appliqué pressing sheet to fuse the pieces, compares a raw-edge straight stitch with a satin stitch, and stitches the bottom-most appliqué piece first, building up so there are no loose ends or overlaps.

  • Free Motion with Record, Applique & Crop · 14:28

    Finishes a quilt using a few features together: recording free-motion work, an appliqué piece, and Crop. A layout box is set around a fox appliqué, the heart design is scaled to the box, and Crop removes the hearts and pearls that fall outside the box or on top of the fox so the stitching goes around it.

bottom of page